LabPackage Microfluidic – Nanofluidic Work Station
Microfluidics and Nanofluidics approaches assist researchers in the life sciences, nanotechnology, chemistry and engineering. In these experiments it is essential to have total control of fluid flow and electric fields, and reliable capture and imaging of often transient phenomena.
LabSmith’s LabPackage gives you complete experiment control, helping you to get started with micro/nanofluidics experimentation quickly. LabPackage lets you take your lab from macro to micro/nano in a flash.
The LabPackage offers a 10% discount off individual pricing for all components. It is an impressively economical and convenient way to equip your entire laboratory!
NOTE: After you’ve placed your order, LabSmith will contact you to select the additional options.
|High Voltage Control|
|HVS448 Eight-channel high-voltage sequencer||Option A HVS448-3000 or HVS448-3000-LC
Option B HVS448-6000D or HVS448-6000D-LC
Option C HVS448-8000D or HVS448-8000D-LC
|High-voltage cable kit set (includes 8 cables)||A-HVC8-STD||1|
|Micro-clip set for use with high-voltage cable kit (includes 8 clips)||A-MC8-01||1|
|Platinum electrode wire, 0.584 mm dia (23 gauge), 10 cm length||A-PT-ELECTRODE||1|
|Synchronous video microscope. Includes control and acquisition software, A-SVM DP5-BW digital optics module, LED-B illuminator module, 10X objective, and motorized X-Y focus traverse stage, sample stage and plate.||SVM340-DP5-BW||1|
|Schott filter for use in camera module.
Wavelengths available: 495, 515, 530, 550, 570, 590, 610, 630, 645, 665 nm.
|Stainless steel sample stage for SVM340 with two rectangular openings:
20 x 32 mm and 22 x 66 mm.
|Automated Fluid Control and Routing Specified for 360um capillary components. Contact LabSmith for 1/32″ or 1/16″ component options.|
|Electronic Interface Controller, includes uProcess™ software||EIB200||1|
|Two-Position Automated Valve||AV201-360||2|
|4 Valve Electronic Manifold||4VM02||1|
|Syringe Pump Body||SPS01||2|
|Syringe glass and plunger – specify size for three (3)||SG-004-C360
|Pressure sensor – specify models for two (2)||uPS0250-C360-10
|Manifold for control of up to 4 pressure or temperature sensors||4AM01||1|
|uTE Thermal-Electric Peltier Module, specify size(s). Includes heat sink and conductive tape.||uTE02-040808||2|
|4 channel power manifold||4PM01||1|
|Integrated breadboard with 8 device connections and 1″ x 3″ cutout for chip viewing via SVM340. Includes mounting hardware for attachment to SVM340.||iBB||1|
|1ML Breadboard reservoir||BBRES-C360-1ML||2|
|5ML Breadboard reservoir||BBRES-C360-5ML||2|
|Microfluidic ChipShop cross channel chip, 75 µm x 75µm , 87 mm, PMMA||10000178||2|
|Bonded Port Connector||C360-400||16|
|Breadboard mounting hardware and tools. Includes TORX wrench, hex wrench, and screws for mounting 5 valves, 10 interconnects to breadboard plus 4 chip clips and 8 electrode clips for mounting chips and electrodes to the iBB||iBB-TOOLS||1|
|Tools for changing syringe glass and plunger set||SPS-TOOLS||1|
|Luer lock disposable syringe||LS-SYRINGE_LL||2|
|Luer tip disposable syringe||LS-SYRINGE_LT||2|
|PEEK capillary or tubing||TUBING||2m|