CapTite Bonded-Port Connector
Bonds to port on chip for capillary-chip interface. Compatible with ~1mm port size. Material: Ultem®. C360-400 interfaces to 360 um OD capillary via C360-100 one-piece fitting (not included) or to chip reservoir. View C360-400 drawing. C360-400S. Slim (2.8 mm diameter) version of C360-400 for use in tight spaces. Interfaces to 360 um OD capillary via C360-100 … Read more
CapTite One-Piece Fitting (Ferrule)
One-Piece fittings (one-piece ferrules) for connecting capillary or tubing to CapTite™ microfluidic routing components. PEEK™. Available for 360um OD capillary (C360-100), 1/32″ OD tubing (T132-100) view drawing, and and 1/16″ OD tubing (T116-100) view drawing. See more CapTite microfluidic connector products.
Standard Breadboard
4″ x 6″ platform for mounting CapTite microfluidic components. 0.25″ hole spacing for mounting fluid circuit components. Suitable for all tubing sizes. Secure components to breadboard using 2-28 self-tapping screws. Use 1/4″ long screws to mount valves and breadboard reservoirs; 1/2″ long screws for mounting interconnects. LS-600-CH includes a 1″ x 3″ cutout for mounting and viewing … Read more
CapTite Chip Reservoir
Threads into Bonded Port Connector to provide fluid reservoir. Also interfaces with luer tip syringe for low pressure connection to syringe. Material: PEEK™; Volume: 85ul. P/N: C360-405R. See more CapTite microfluidic connector products.
CapTite Interconnect Union
Multiport fitting for routing or combining microfluidic volumes. Available for use with 360um OD capillary (C360-202/A), 1/32″ OD tubing (T132-202/A), or 1/16″ OD tubing (T116-202) via CapTite one-piece fitting (not included). Material: Ultem® or Acrylic (part numbers ending in ‘A’ are Acrylic). Can be mounted to LabSmith breadboards. See more CapTite microfluidic connector products.
CapTite Interconnect Elbow
Multiport fitting for rerouting or combining microfluidic flows. Available for use with 360um OD capillary (C360-205 or C360-205A), 1/32″ OD tubing (T132-205 or T132-205A), or 1/16″ OD tubing (T116-205) via CapTite one-piece fitting (not included). Material: Ultem® or Acrylic (part numbers ending in ‘A’ are Acrylic). Can be mounted to LabSmith breadboards. See more CapTite microfluidic … Read more
CapTite Interconnect Tee
Multiport fitting for routing or combining microfluidic flows. Available for use with 360um OD capillary (C360-203/A), 1/32″ OD tubing (T132-203/A), or 1/16″ OD tubing (T116-203) via CapTite one-piece fitting (not included). Material: Ultem® or Acrylic (part numbers ending in ‘A’ are Acrylic). Can be mounted to LabSmith breadboard. View C360-203/T132-203 drawing or T116-203 drawing. See more CapTite … Read more
Luer Tip Disposable Syringe
Interfaces with chip reservoir or microfluidic ChipShop Luer interface chips. Volume: 1ml. Fluidic interface: Luer. P/N: LS-SYRINGE_LT See more CapTite microfluidic connector products.
Luer Lock Disposable Syringe
Luer Lock Disposable Syringe. Interfaces with C360-300, T132-300, and T116-300 Luer-Lock adapters. Volume: 12 ml. P/N: LS-SYRINGE_LL See more CapTite microfluidic connector products.
CapTite Interconnect Y (Wye)
Multiport Y (wye) 3-port fitting for routing or combining microfluidic flows. Available for use with 360um OD capillary (C360-203Y), 1/32″ OD tubing (T132-203Y), or 1/16″ OD tubing (T116-203Y) via CapTite one-piece fittings (not included). Can be mounted to LabSmith breadboards. See more CapTite microfluidic connector products.
CapTite Interconnect Cross
Multiport fitting for routing or combining microfluidic flows. Available for use with 360um OD capillary (C360-204 or C360-204A), 1/32″ OD tubing (T132-204 or T132-204A), or 1/16″ OD tubing (T116-204) via CapTite one-piece fittings (not included). Material: Ultem® or Acrylic (part numbers ending in ‘A’ are Acrylic). Can be mounted to LabSmith breadboards. See more CapTite microfluidic … Read more
CapTite Union Adapter
Union fitting for connection to 360um capillary and 1/32″ tubing via one-piece fittings (not included). Material: Ultem® or Acrylic (part number ending in ‘A’ is Acrylic). Can be mounted to LabSmith breadboard. See more CapTite microfluidic connector products.
Needle Interconnect
Needle Y and Cross connectors. 27 gauge needle interconnects for low-pressure connection to 0.016″ ID flexible tubing. Material: Ultem (body) and 316 stainless steel needles. Cross Connector has four ports, download product drawing here. Y Connector has three ports, download product drawing here. See more CapTite microfluidic connector products.
CapTite Luer-Lock Adapter Assembly
PEEK™ female fitting for connecting Luer Lock syringe to capillary or tubing. Available for use with 360um capillary (C360-300/A), 1/32″ tubing (T132-300/A), or 1/16″ tubing (T116-300/A) (view drawing). Part numbers ending in ‘A’ include a one-piece fitting for attachment to tubing. See more CapTite microfluidic connector products.
CapTite MV201 Manual 3-Port Selector Valve
3-port manual valve with “L” flow pattern. Available for use with 360um capillary, 1/32″ tubing, or 1/16″ tubing via one-piece fittings (not included). Can be mounted to LabSmith breadboards. LabSmith’s MV201 valves are constructed with Vespel® as the wetted material*, for use with a wide variety of chemicals. Also available as an automated valve. * Selected valves are … Read more
CapTite MV202 Manual 4-Port Selector Valve
4-port, 2-position (+ closed) manual valve. Two simultaneous flow streams between adjacent ports. LabSmith’s MV202 valves are constructed with Vespel® as the wetted material*, for use with a wide variety of chemicals. Available for use with 360um capillary or 1/32″ tubing via one-piece fittings (not included). Can be mounted to LabSmith breadboards. Also available as an automated … Read more
CapTite MV303 Manual 6-Port Injection Valve
6-port, 2-position manual valve. Three simultaneous flow streams between adjacent ports. Available for use with 360um capillary via one-piece fittings (not included). Can be mounted to LabSmith breadboards. LabSmith’s MV303 valves are constructed with Vespel® as the wetted material*, for use with a wide variety of chemicals. Also available as an automated valve. * Selected valves are available … Read more
CapTite One-Piece Plug
One-Piece plug for plugging CapTite ports. PEEK™. C360-101 plug can be used in any -C360 or -T132 port. T116-101 plug can be used in any -T116 port. View component drawings of C360-101 and T116-101. See more CapTite microfluidic connector products.
Chip Interface Kit
The Chip Interface Kit includes all the CapTite™ fittings, ferrules, reservoirs and tubing you need to construct microfluidic circuits, as well as the chip-to-world interface components for leak-free connection to your microfluidic chips. Kit prices offer you great value for chip-based research, including an overall 5% discount in addition to normal quantity discounts. Chip Interface Kits are … Read more
Breadboard With Cut-Out for Microscope Imaging
4″ x 6″ breadboard for mounting CapTite microfluidic components. Includes a 1″ x 3″ cutout for mounting and viewing a slide or microfluidic chip with the SVM340 synchronized video microscope. Mounts to SVM340 breadboard sample stage (A-SVM-STAGE-BB).
CapTite Two-Piece Adapter
For adapting a CapTite™ component to a different microfluidic tubing size. Material: PEEK™. Dimensional drawings of C360-A116 and T116-A360/T116-A132. T116-A360: used to attach 360um OD capillary to a component with a T116 female port. T116-A132: used to attach 1/32″ OD tubing to a component with a T116 female port. T132-A360: used to attach 360um OD capillary to a component with a T132 female … Read more
Microscope Top Stage for Use with LabSmith Breadboards
Sample stage for coupling LabSmith breadboards (iBB or LS600-CH) with the SVM340 microscope.
CapTite Cartridge
Reusable PEEK™ column for customizable packing and easy sample preparation. Includes four 10um polyester sample filters and two one-piece fittings. Available volumes: 50ul (uCTG-50-C360), 100ul (uCTG-100-C360), and 150ul (uCTG-150-C360). Compatible with 360um OD capillary. See more CapTite microfluidic connector products. Packing Instructions for CapTite microfluidic cartridge.
CapTite Filter Holder
PEEK™ connector for holding filter – can be used with a variety of filters including 3M™ Empore™ solid phase extraction filters (not included). For 360um OD capillary (uFilter-360). Two one-piece fittings required for connection to capillary (not included). See more CapTite microfluidic connector products. CapTite filter holder instructions
10um Mesh Polyester Filters, 6mm diameter
Set of 4 polyester filters with 10um diameter holes for CapTite refillable cartridges or uFilter-360 filter holder.
CapTite Breadboard Reservoir
Reusable PEEK™ Reservoirs available in two sizes. BBRES-1ML 1.1 mL reservoir with sealable cap. Includes four ports for direct connection to capillary or tubing (three in reservoir and one in cap). Cap seals with Viton® o-ring (two included) for vacuum or pressure applications. Max pressure 1800 kPa (250 psi). BBRES-5ML 5 mL reservoir with push on … Read more
Breadboard Mounting Tools
Breadboard mounting hardware and tools. Includes a Torx driver, hex wrench, and screws for mounting 10 valves/reservoirs and 5 interconnects to breadboard.
Chip Clamps
Set of 4. Use the BB-Chip Clamps to secure the microfluidic chip to the integrated breadboard (iBB) or LS-600-CH breadboard. P/N: BB-Chip_Clamps
Epoxy Adhesive, 12ml
12ml two-part high-strength epoxy adhesive (3M™ DP420) for attaching bonded-port connectors to chip. glass, metal and plastic bonding room temperature cure 20 minute work life, 2 hours set, 24 hours full strength color: off-white See more CapTite microfluidic connector products.
