Tools & Supplies

All the tools and supplies you need for building microfluidic circuits using CapTite and uProcess components. Includes installation wrenches, adhesives, Torx drivers, screws and hardware, chip clamps, and more.

 
LabSmith LS-TORX Torx driver (Torx wrench)

LS-TORX Driver

T7 TORX driver for installing breadboard screws.

hew wrench, 1/8" - LabSmith

Hex Wrench, 1/8″

1/8″ hex wrench for installing one-piece fittings and plugs.

Breadboard Mounting Tools

Breadboard mounting hardware and tools. Includes a Torx driver, hex wrench, and screws for mounting 10 valves/reservoirs and 5 interconnects to breadboard.

iBB tools

iBB-Tools

Breadboard mounting hardware and tools. Includes TORX wrench, hex wrench, screws for mounting 10 valves or reservoirs and 5 interconnects to breadboard, plus 4 chip clips and 4 electrode clips for mounting chips and electrodes to one of the uProcess (uPB or iBB) breadboards or CapTite breadboards.

SPS-TOOLS Syringe/Plunger Installation Tools

Syringe/plunger installation tools for SPS01 automated syringe pump. Includes hex tool for syringe plunger removal/installation and hex wrench to secure syringe glass.

Capillary tubing cutting stone

Capillary Cutting Stone

Cutting stone for cutting fused-silica capillary. Note: the cutting stone will not cut PEEK capillary or tubing. For PEEK capillary or tubing, we recommend using a sharp blade. 

breadboard electrode cable clip (BB-ECLIP08)  for high voltage cables

Breadboard Electrode Clips

Pack of 4 electrode clips for mounting up to 8 electrode cables (HVC high voltage cables or any 0.125″ diameter cables) on a microfluidic breadboard. P/N: BB-ECLIPS   Use breadboard electrode clips (BB-ECLIPS08) to secure HVC high voltage cables from the HVS448 High Voltage Sequencer to a fluidic breadboard for secure application of electric fields … Read more

Microfluidic chip clamp secures microfluidic chip to breadboard

Chip Clamps

Set of 4. Use the BB-Chip Clamps to secure the microfluidic chip to the integrated breadboard (iBB) or LS-600-CH breadboard. P/N: BB-Chip_Clamps

LS-SCREWS .50: Interconnect Mounting Screw and Standoff Set (LS-SCREWS.50)

LS-SCREWS .50: Interconnect Mounting Screw and Standoff Set

Set of 10 thread-forming screws (2-28 x 1/2”) and 10 standoffs to mount 5 interconnects to breadboard.

LS-SCREWS .25: Valve/Reservoir Mounting Screw Set

LS-SCREWS .25: Valve/Reservoir Mounting Screw Set

Set of 20 thread-forming screws (2-28 x 1/4”) to mount 10 valves or reservoirs to breadboard.

Epoxy Adhesive, 12ml

12ml two-part high-strength epoxy adhesive (3M™ DP420) for attaching bonded-port connectors to chip.  glass, metal and plastic bonding room temperature cure 20 minute work life, 2 hours set, 24 hours full strength color: off-white See more CapTite microfluidic connector products.

Flat Flex Ribbon Cables.  For connection between 4VM-Valves or 4AM-Sensors. Part of the uProcess microfluidic fluid connector and control platform.

Flat Flex Ribbon Cables

Flat Flex Ribbon Cables.  For connection between 4VM-Valves or 4AM-Sensors. Part of the uProcess microfluidic fluid control and connection platform.  Note: each 4AM Analog Sensor Manifold or 4VM Valve Manifold comes with a set of 4 flat flex ribbon cables.