LabSmith News

Visit Us!

Upcoming Events

Upcoming Events

There are no upcoming events at this time.

Now Connect LabSmith Syringe Pumps Directly to 1/32″ Tubing

By sarah on April 17, 2014.

No more adapters! Connect 1/32″ o.d. tubing directly to the SPS01 syringe pump using a T132-100 one-piece fitting. Available for syringe glass volumes of 20 microliters and 100 microliters.

Reliable Delivery, Remarkable Size

Only 100 mm long, the SPS01 syringe pump (Figure 3) uses a fraction of the space and power required by other syringe pumps. The SPS01 delivers volumes from 5 to 100 μl, with resolution as low as 8 nl.

Low Dead Volume, Easy Cleaning

The SPS01’s unique syringe glass design directly connects to 360 µm OD capillary and 1/16” OD tubing via LabSmith’s CapTite connector for very low dead volumes. The Delrin® housing allows syringes to be easily removed and replaced, so a single pump can provide a wide range of volumes. All wetted surfaces can be easily removed for sterilization and autoclaving.

Coordinated Fluid Delivery

LabSmith SPS01 syringe pumps are fully programmable for coordinated fluid delivery and sequencing. An Electronic Interface Board (EIB) is required for operation; a single EIB can simultaneously control up to 10 uDevices (valves and syringe pumps), or can control many more sequentially.

Included uProcess™ software makes it easy to create programs to operate syringes and valves and pressure sensors.